Laser Engraving & Cutting
Essentials
Instructions:
You have one file that you need to engrave and cut for school. It has specific requirements for the dimensions. Your task is to engrave and cut the file in accordance with the requirements.
File – Spyder Lab Key Chain : Download
Material Type: Wood
Key Chain dimension: width 2.5 inch
Artwork size: Unknown
Set up your laser to print on the appropriate media. The artworks size may not be correct, So you need to adjust the scale or dimension of the graphics in laser software. Make an appropriate layout to engrave the file. Try not to waste too much material.
Advanced
Instructions:
You have one file that you need to engrave for school. It has specific requirements for the dimensions. Your task is to engrave the file in accordance with the requirements.
File – Spyder Lab Tumbler / Glass: Download
Product: Coated Aluminum Tumbler or similar product / Glass
Engraving dimension: width 2.5 inch
Artwork size: Unknown
Set up your laser to print on the appropriate media. The artworks size may not be correct, So you need to adjust the scale or dimension of the graphics in laser software. Make an appropriate layout to engrave the file. Test Engrave on the sticker tape before you actual engrave the product.
