Brother GTXpro DTG Printer
Certification Guide
For both DTG & DTF section
Maintenance
- Humidity & Temperature
- Add cleaning liquid
- Waste ink Bottle
- Nuzzle Check, Head Clean.
- White ink circulation
- Suction Cap; Exhaust Cap; Wiper Cleaning; Nozzle Guard Cleaning
- Cleaning Stick T & R
- Leave Machine on
Hardware (Heat Press)
- Heat Press / Curing Oven / Converyor Dryer Settings
- Timer, Temperature
- Adjust Pressure
Hardware
- Power Switch
- Replace/Install Ink Cartridges
- Shake white ink cartridges
- Expired white or CMYK ink
- Adjust Platen Height
- Print Button
Software
- GTX Graphics Lab
- Supported File Types
- Import Design
- Artwork Scaling, Size, Position, Background Color
- Table size
- Select Ink
DTG section
Hardware
- Printable Apparel material
- Align Garment
- Iron Garment
- Position Garment properly on Platen
- Print on White/pretreated/RTP colored shirts.
- Brother DTG Pretreatment
- Print on Polyester, Brother Polyester Pretreatment
- Pretreat non-pretreated colored shirts.
- Properly Remove Garment from Platen
- Cure Garment
DTF section
Hardware
- Apparel Material that works with DTF
- DTF sheet print side
- Hot-melt adhesive Powder
- Powdering process
- Melt the powder
- Sheet crack after melting
- Safely
- Align & Pinnt on DTF film
- Position film on garment
- Press film on garment
- Peels film
- Re-press the garment
- Store printed DTF films