Flexcut SBB Maxima – White (01) 19.7”x5yds
A high-quality lightweight film designed especially for sports jerseys and other dyed polyester fabrics via heat transfer.
Uses: Customized sports jerseys, promotional polyester textiles
FlexCut SBB Maxima is the 4th generation SBB film by SEF.
Highly technical film designed to prevent migration when heat transferring to dyed polyester fabrics (sports jerseys type).
Migration / Re-Sublimation
Heat transferring films on polyester or polyamide fabrics can result in “migration”. The heat of the press can re-activate the inks and start migration (change the color) on the heat-transferred graphic. This migration, or re-sublimation, phenomenon can take 48 to 72 hours to happen, sometimes even 2 to 3 weeks.
1) If you transfer on fabrics other than polyester or polyamide there is no actual migration risk, you can therefore use any of our standard heat transfer films.
2) If you transfer on sublimated polyester fabrics (the back of the fabrics is white or lighter shade of color) a low temperature SEF film like FlexCut X4 can prevent migration. But test, don’t guess and use SBB Maxima films if you have any doubts !
3) If you transfer on dispersed dyed polyester fabrics (same color back and front of the fabric) the use of SEF SBB Maxima films is mandatory.
“Soft shell” garments made out of dispersed dyed micro fibers are the worst “migration” case scenario, we recommend to carefully test FlexCut SBB Maxima films every time.
> Waterbased PU
> Thickness (without liner): 160μ
> Fastness: 60°C
> Transfer Temperature: 130°C (265°F)
> Transfer Time: 10 seconds
> Pressure: Medium/High
> Cold peel
SUITABLE FOR TEMPERATURE SENSITIVE AND MIGRATING TEXTILES
There are no reviews yet.